Polysulfone (PSU/PPSU) is the transparent engineering plastic of choice where repeated steam sterilisation is routine. Unlike polycarbonate, which cracks under aggressive sterilisation cycles, sulfone polymers survive thousands of autoclave passes without crazing or losing strength. NAGOMER supplies PSU and PPSU sheets and rods for medical trays, surgical instrument handles, and food-processing components.

Nylon remains the workhorse of mechanical plastics: tough, wear resistant, and far cheaper than PEEK, which is why cast polyamide sheet and rod are found in gears, slides, and rollers across every industry. The catch is moisture — PA6, PA66, and PA12 behave very differently when humidity changes. NAGOMER supplies cast nylon and PA12 stock shapes and machines finished components to drawing.

Robots and automation systems reward materials that cut weight, damp vibration, run without lubrication, and control static electricity. From ESD-safe end-effectors in electronics assembly to carbon-filled PEEK arms on high-speed pick-and-place machines, engineering plastics are enabling faster, cleaner, and quieter automation. NAGOMER supplies and machines the full palette — POM, PA66, PEEK, UHMW-PE, and ESD grades.

Sunlight is silent but relentless: ultraviolet radiation breaks polymer chains, turning glossy surfaces chalky and tough parts brittle within seasons. Choosing the right plastic — or protecting it correctly — is the difference between a ten-year service life and a warranty claim. NAGOMER supplies UV-resistant materials and stabilised grades for outdoor enclosures, architectural components, and solar equipment.

Food and beverage equipment places a unique combination of demands on materials: regulatory compliance, resistance to cleaning chemicals and steam, low moisture uptake, and consistent wear performance in wet, high-cycle environments. NAGOMER supplies food-contact engineering plastics — including natural PEEK, POM-C, UHMW-PE, and PTFE — used in conveyors, filling machines, and packaging lines worldwide.

PEEK CMP retaining ring keeps wafers secure during chemical mechanical polishing. Covers wear resistance, slurry compatibility, and tolerances.

Polyurethane casters carry heavy loads without marking floors or making noise. Explains durometer, load capacity, and wheel selection.

HDPE low temperature toughness keeps freezer liners, trays, and wear parts reliable. Covers cold impact behavior, ductility, and design tips.